Simple and Easy Tips for Do It Yourself Installing Kitchen Cabinets

Do-it-yourself installing kitchen cabinets can be a challenging task, but there are a few tips that will make the project much easier.

do it yourself installing kitchen cabinet picture

do it yourself installing kitchen cabinet picture

One of the most important tips for do it yourself installing kitchen cabinets is to begin with a sturdy, level floor surface. The soundness of the sub-floor should be checked before beginning the project. Any necessary repairs to the area also should be made before proceeding with the cabinet installation. Next, the flooring surface will need to be checked to make certain that it is smooth and level; a floor leveling compound can be used to smooth out any depressed areas, and a sander can smooth out raised spots.

Another good tip for do it yourself installing kitchen cabinets is to remove the molding along the base of the wall where the structures will be placed.

Installing white kitchen cabinet photos

Installing white kitchen cabinet photos

When installing kitchen cabinets, removing this molding will ensure a flush fit against the rear and side walls. Finishing nails or caulking should be cleaned from the floor or walls after removal. Next, a level line should be drawn on the walls where the top of the cabinets will meet. This line will provide a reference point during the installation process to determine if the cabinets are level.

DIY installing kitchen cabinet models

DIY installing kitchen cabinet models

Before placing the cabinets in their final location, the routes of all electrical wires and plumbing should be planned. Another important tip for do it yourself installing kitchen cabinets is to proceed slowly with the work. A slow pace will permit adjustments and alterations to be made before the cabinets are attached to the wall. Installing only one cabinet unit at a time can help to avoid compounding any mistakes.

Simple and Easy Tips for Do It Yourself Installing Kitchen Cabinets

DIY install kitchen cabinets images

Do-it-yourself installing kitchen cabinets should begin at the highest point of the floor. This high beginning point will allow any sloping areas to be filled in with wood filler or shims. It is important to maintain a level installation to prevent gaps from forming between the cabinet facings. The cabinets must be level in all directions to avoid creating an uneven facade. It may be necessary to use wooden wedges to level the cabinets over particularly sloping surfaces.

Installing Kitchen Cabinets

The post Simple and Easy Tips for Do It Yourself Installing Kitchen Cabinets appeared first on Home Design Interiors.


by Ummi Reisya via Home Design Interiors

0 Response to "Simple and Easy Tips for Do It Yourself Installing Kitchen Cabinets"

Post a Comment